Quick Answer: How Do You Do A Broken Out Section View In SolidWorks?

What is a broken out section view?

A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model.

A closed profile, usually a spline, defines the broken-out section..

How do you edit a broken out in Solidworks?

To delete or edit a broken-out section:Right-click the broken-out section in the FeatureManager design tree and select one of the following.Delete.Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .Edit Sketch. Select the sketch entity and edit it, then close the sketch.

What is a aligned section view in Solidworks?

You can create an aligned section view in a drawing through a model, or portion of a model, that is aligned with a selected section line segment. The aligned section view is similar to a Section View , but the section line for an aligned section comprises two or more lines connected at an angle.

What is projected view in Solidworks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

How do you align a view in Solidworks?

To align one drawing view to another:Do one of the following: Select a drawing view, and click Tools > Align Drawing View > Horizontal To Another View or Vertical To Another View. … Select the view to which you want to align. The model origins or drawing view centers of the views are aligned along the chosen direction.

What are the 7 types of section views?

Types of Sectional ViewsFull Section. If the imaginary cutting plane passes through the entire object, splitting the drawn object in two with the interior of the object revealed, this is called a “full section.” A full section is the most widely-used sectional view.Half View. … Offset View. … Revolving View. … Broken View.

What is full section and half section?

2 What is the difference between a half and a full section? – A full section view is the full section. The half section view is half of the section. It is used when the object is symmetrical in both inside and outside details.

What is a section view?

∎ A section view is a view used on a drawing to. show an area or hidden part of an object by. cutting away or removing some of that object.

How do you do a section view?

Rules of Sectioning Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown. Rule 4: Hidden features should be omitted in all areas of a section view.

What is half section view?

• A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.

When and why is a section view necessary?

In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.

How do you insert a section view in Solidworks?

To create a section view manually:Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. … To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.Sketch a section line. … Click to place the view.

What is the purpose of a removed section view?

Removed section views show slices of the model at selected locations along a drawing view.

What is the purpose of a section view?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.

How do you move a section view arrow in Solidworks?

When you create a view letter attached to a view arrow, such as an auxiliary view or projected view, you can move the view letter. This is similar to moving the view letter in a section view. To move a view arrow letter: Select the arrow and drag the letter.

Do you show hidden lines in a section view?

Section views do not include hidden lines. Any material cut when a section view is defined is hatched using section lines.

How do you move a section view in SolidWorks?

To move a drawing view, use one of the following methods:Click and drag an entity (including edges, vertices, cosmetic threads, and so on). … Select a drawing view, then move (nudge) it with the arrow keys. … Press Alt, place the pointer anywhere in the view, and drag the view.More items…